Difference between revisions of "Palm Pre"

From MicroFocusInternationalWiki
Jump to: navigation, search
m (Troubleshooting)
(Other Notes)
Line 133: Line 133:
== Other Notes ==
== Other Notes ==
Kill Pill - correctly factory resets device to defaults.
== Troubleshooting ==
== Troubleshooting ==

Revision as of 09:51, 27 January 2011

Return to Data Synchronizer Device Page
This page was last modified on 01/27/2011

This wiki page details the compatibility and functionality of the Palm Pre with Novell Data Synchronizer Mobility Connector. Please contribute relevant information or corrections in our effort to facilitate end-user experience.

Note: This page is not for reporting defects and bugs. Those should be reported in the Novell Forums. Only limitations that are consequences of the nature of the phone should be reported here.

Device Summary


Novell Certified for Data Synchronizer Mobility Connector?   Yes
Ease of Setup   Average
Email   Supported with Limitations
Contacts Supported with Limitations
Calendar   Supported with Limitations

OS Requirements:


Setup Instructions

Verify Preliminary Setup

a. Make sure that your Mobility Pack server is up and running and you have the following information:
I. Server Address
II. Port
1. Whether the server requires a secure connection or not
III. Username and Password that is setup on the server

b.Make sure that you've done the initial setup on the device meaning that you've created a Palm Profile and the phone is ready to use. You should be at the home screen with the quick launch bar at the bottom with icons of an envelope, calendar, phone etc.

Account Setup

1. From the quick launch bar tap on the envelope
Note: When there's no email account setup on the device: After you tap the envelope it will take you to an “Add an Account” screen where it'll ask for an email address and password. This e-mail needs to be the username that you've set up on your Mobility Pack server with the appropriate password.
When there's already an email account setup on the device: After you tap the envelope it will take you to the account currently set up on the device. By tapping on “Email” in the top left hand corner of the screen then "Preferences and Accounts” you will then be able to tap “Add An Account” if you wish to add a second account. Then you'll go through the same set up process described below.

2. Enter the username and password that are setup on the server. It will try to auto-detect which kind of email account it is (i.e. Exchange, gmail, etc.) . Generally from our testing when it's an exchange account it won't auto-detect it and it will then give you an option for “Manual Setup”.
Note: If you just want to go straight to “Manual Setup” tap the “Email” in the top left hand corner of the screen and then tap “Manual Setup” on the “Add an Account” screen.

3. In "Manual Setup"
  1. Select the mail type. The options are IMAP, POP, Exchange (EAS), Gmail, Yahoo)
  2. Enter the email address on the server (you will need the @ with the domain name: i.e. @novell.com)
  3. Enter the incoming mail server. When it's an exchange account, after you select mail type: Exchange the incoming mail server will auto-populate with https://. You WILL need the https:// before your server address. If it's a secure connection (port 443) then you'll need to keep the “s” of “https” but if you're using an unsecure connection (port 80), the “s” of “http” will need to be removed leaving you with “http://”. After the “https://” or “http://” you enter the IP address of your Mobility Pack server.
  4. You do not need a domain (as far as our testing has shown)
  5. Enter the Mobility Pack server username and password
  6. Tap "Sign-In"

4. To change how often your device syncs with the server and how many days back to sync go to “Email” in the top left hand corner>Prefereneces and Accounts>tap the account>scroll to the “Sync” section.

SSL Considerations

  • If you get certificate errors when trying to connect to Mobility Connector or after upgrading your connector you will need to accept a cert. you can get your cert by browsing to the mobility connector address and the browser will prompt you to accept the certificate. You may need to restart your Pre for the certificate to fully register with the email client. If you still receive the cert error, delete any existing mobility certs by opening your Launcher, go to Device Info, scroll down to More Info, open Preferences menu and choose Certificate Manager.

How to configure your mobility server to use a self-signed cert for testing purposes


Working Features:

Device Limitations (not defects):

  • Email sent from the device to recipients outside of your own system do not contain a FROM address
  • Shared folder content does not appear on the Pre
  • Messages sent inside the company show the 'domain' in the brackets eg. <domain.com user@domain.com>



Working Features:

Device Limitations (not defects):

  • Contact groups are aggregated, groups are not displayed.



Working Features:

Device Limitations (not defects):


Other Notes

Kill Pill - correctly factory resets device to defaults.


Please do not use this wiki to report bugs or defects. Instead, use the Novell Data Synchronizer Forums or call Novell Support.

Further Reading


Thanks to the contributors for this device information!

Adam Thompson. Mark Mazurkiewicz.