Difference between revisions of "Nw65sp7"

From MicroFocusInternationalWiki
Jump to: navigation, search
(Winsock update)
Line 119: Line 119:
  
 
Note that the problem is not specific to SP7 but has only been discovered after the release of SP7.
 
Note that the problem is not specific to SP7 but has only been discovered after the release of SP7.
 +
 +
=== iprntnw65sp7a ===
 +
http://download.novell.com/protected/Summary.jsp?buildid=u0MH4z5NQts~
 +
 +
Updated iPrint modules (NDPSM.NLM, NDPSGW.NLM, and IPPSRVR.NLM) for NetWare 6.5 Support Pack 7.
 +
 +
This update is intended for servers running NDPS or iPrint on NetWare 6.5 Support Pack 7. This update is also recommended for servers running Support Pack 6 and encountering the problem documented in TID 3842033.
 +
 +
Fixes issue with Macs running 10.5.2 and Security Update 2008-02 abending the server.
 +
 +
https://secure-support.novell.com/KanisaPlatform/Publishing/667/3842033_f.SAL_Public.html
  
 
=Post SP7 known issues=
 
=Post SP7 known issues=

Revision as of 14:47, 2 April 2008


This is a brief guide for installing this particular service-pack. As time moves on, post-SP patches will be added to this document. The information here is gleaned from Novell-provided information, and the collective wisdom of the Support Forums. Feel free to edit this page if you find errors or if you have additional information to provide. However if you have questions or comments, please post them on the discussion page.

The overlay CDs and DVD for SP7 were released on 5 October 2007 as part of the release of OES2 (Open Enterprise Server 2) and the standalone version for updating existing NetWare 6.5 servers was released on 9 October 2007, about 11 months after SP6.

For the moment, it is still a bit early to give a final judgment on the quality of this particular support pack.

Sticky.gif Note: While this article talks about applying SP7 to an existing servers, the patches and known issues sections do also apply to new servers installed with the SP7 overlay CDs or DVD.

Warning.gif Warning: To update existing servers, you should not use the overlay CDs or DVD, but only the standalone version NW65SP7.zip. Novell does not officially support upgrading existing servers using the SP7 overlay CDs or DVD.

What's new in SP7

beside the usual patches and fixes, the following changes in functionality or major updates are included in SP7:

  • for new installs, the SP7 overlays will now install eDirectory 8.8 SP2 (previously, the overlays always installed eDirectory 8.7.3.x). A support pack install will not upgrade your eDirectory to 8.8.2 but instead just patch it to the latest 8.7.3.x patch level.
  • The overlay version of SP7 can be installed as a virtual machine under Xen on a SLES 10 SP1 server
  • SP7 includes iManager 2.7. iManager 2.7 includes some significant enhancements like a full tree view and support for browsing the file system and managing files system rights. iManager 2.7 will only be installed automatically if you have been using iManager 2.5 or 2.6 before. If the server is still running iManager 2.02, then iManager will not be upgraded. For more information, see http://www.novell.com/documentation/oes2/inst_oes_nw/data/buymz1k.html#b6xhr3v
  • Support for Windows Vista in iPrint. Vista support does not yet support all features that exist for XP workstations. For details, see http://www.novell.com/documentation/oes2/iprint_nw/data/boeyh9p.html#bbn7dyz
  • the overlay CDs are no longer supported for upgrades from previous NetWare versions. If you want to upgrade a NetWare 5.1 or 6.0 server to 6.5 SP7, you will first have to upgrade with an SP6 overlay CD and then install SP7 on top of it. For details, see http://www.novell.com/documentation/oes2/inst_oes_nw/data/buymz1k.html

Installing NW65 SP7

Besides including all the post SP6 patches released prior to SP7, it also includes new functionality for a number of products included with NetWare 6.5.

Downloading SP7

The main download URL for SP7 is http://download.novell.com/Download?buildid=vAIyb4R70b4~ this is the file you need to update existing servers.

If you want to install new servers using the overlay CDs that include SP7, either use the 2 CD images NW65OSSP7.iso and NW65PRODSP7.iso or the DVD image NW65SP7_OVL_DVD.iso available at http://download.novell.com/Download?buildid=GsODlkBPM2g~

Expand the Service Pack

Just like SP6, NW65SP7 is being distributed as a ZIP file called NW65SP7.ZIP. This is very convenient as you can now extract it on any platform that has a tool to unzip files. For instance, you can copy NW65SP7.ZIP to a remote server and then run UNZIP.NLM from the server console to unzip it. It is recommended to unzip the support pack to the root of one of the server's volumes - it does not have to be SYS. All the support pack files except for the readme will then be in a subdirectory called NW65SP7.

Verify SERVER.EXE is present

Some Antivirus software is configured to consider any .EXE file to be potential spyware and will not allow it to be written to a directory called STARTUP. McAfee VirusScan is well known for this. Verify that the file is present where it should be, under nw65sp7\STARTUP\SERVER.EXE. With some unzip utilities, the symptom of the problem is that you get asked for a password to unzip the file. However the zip file is not password protected.

For details on this problem go here.

Disable Transactions on NSS volumes

Sticky.gif Note: This recommendation was true for SP6. I don't know if the NSS code in SP7 changed to handle the TTS format change more gracefully. Just to be safe, turn off TTS and you are sure to not have any problems.

Warning.gif Warning: Not all volumes have the transactions tracking system enabled!! You should not have the transactions tracking system enabled on both traditional and NSS volumes at the same time!!Read Novell documentation on when and why the transactions tracking system should be enabled or disabled on a volume!! You should verfiy which volumes have the transactions tracking system enabled before using the disable command !!!.


In some cases, the server may abend at startup because of incompatibilities in the transaction tracking system between SP6 and earlier versions. This is documented in TID3463889. If you are not yet on SP6, to avoid this problem, you should disable the transaction tracking system prior to installing SP7 by using the console command:

NSS /NoTransaction=ALL

If you want to upgrade from SP6 to SP7, this problem should not affect you.

Load NWCONFIG and apply the service pack

The method for installing a service pack through NWCONFIG is well documented in the README. Here are just some comments on the questions asked during the SP install

Backup files replaced by NetWare Support Pack?

If you reply "yes" to this question, a backup of all the files replaced by SP7 will be made. You can later back out SP7 if you did the backup. I would strongly recommend always selecting the backup option unless you really have too little space left on your SYS volume. You can always delete the BACKSP7 directory later if you see that you don't need the backup. If you apply SP7 several times, you should only use the backup option on the first SP7 install and disable it on later installs.

Do you want to Update the Storage/LAN/PSM/WAN drivers currently in use?

It is highly recommended that you always enable the option to update drivers. People are often reluctant to enable this option because they are not sure the drivers included with SP7 do really work with their hardware. This however leads to many people having subtle problems later on because of outdated drivers. While it sometimes happens that drivers included with SP7 are incompatible with the hardware being used, the failure is generally immediate and you can manually backrev the specific driver that failed. If you don't use the driver update option, you will also miss out the important updates on Novell drivers like IDEATA.HAM, IDECD.CDM and SCSIHD.CDM. Generally, you should not just allow SP7 to update your drivers, but you should also take advantage of the SP install to check your hardware vendor for updated drivers and firmware.

Do you want to install iManager plugins now?

An iManager without plugins is of little use. As such, you really need the plugins to work with iManager 2.7. However the plugin installation part of the SP7 install is by far the longest part of the whole install. So if you limited in time to install SP7, then you might decide to install SP7 without iManager plugins and install the plugins later on. In normal cases however you should always select the option to install the plugins.

Reboot the server after copying files?

You should install SP7 when users are not working on your server and you should reboot after installing the SP. Enabling the reboot option will cause the reboot to occur automatically after the SP install. Note however that open files can force you to confirm the reboot on the server console.

Login prompt

The main purpose of the login prompt is to extend the schema of your tree. That means the user you specify at the login prompt should not just have supervisor rights to this server, but it needs supervisor access to the root of the tree, at least for the first SP7 you install into your tree.

Reboot & Verify services

Reboot like you should and make sure things are working. If you had to uncomment things to get java unloaded, put them back here. If you've made any hand-edits to files such as httpd.conf verify their state before putting the server back into production.

If you get any Public Symbol errors, the problem is almost certainly that Server.exe failed to upgrade; either it did not extract from the SP7 .zip file (see "Verify SERVER.EXE is present" section above), or it failed to overwrite the previous version on the server you are upgrading - this can happen if the previous server.exe has somehow acquired a newer file date than the one from SP7

Fix and reenable the transaction tracking system

Warning.gif Warning: Not all volumes have the transactions tracking system enabled!! Only enable the volumes that you disabled before installing SP7!!!You should not have the transactions tracking system enabled on both traditional and NSS volumes at the same time!!Read Novell documentation on when and why the transactions tracking system should be enabled or disabled on a volume!! .

To avoid potential problems with the transaction tracking system causing future abends as described in TID3463889, delete the file UXACTION.LOG from the root of every volume on your server where the file exists. If you need transaction tracking on one of your volumes, you can enable it again using the following command:

NSS /Transaction=volumename

Post SP7 Patches

XNTPD update

http://download.novell.com/Download?buildid=tyRUNsw_mhU~

TID3660458

  • Novell Remote Manager - Diagnose Server - Health Monitor - NTP Monitoring Service points to an invalid link.

(Nothing displays)

  • Novell Remote Manager - Manage Applications - NTP Configuration - does not show the ntp.conf file edit screen.

TCPIP update

http://download.novell.com/Download?buildid=aRl9LgVUbTw~

This update fixes the 'Bad Resource Tag passed to LSLReturnRcvECB' abend that occurs when using SP7 on a server running BorderManager.

COMN.NSS update for OFM

http://download.novell.com/Download?buildid=vgIJ013SZ8c~

This patch fixes an abend that occurs when using Symantec's BackupExec with St. Bernard's Open File Manager (OFMCDM.CDM).

SCSIHD.CDM update

Updated SCSIHD.CDM to address a couple issue post NetWare 6.5 SP7

http://download.novell.com/Download?buildid=q_bACsNZtrc~

Winsock update

Updated Winsock suite may be used with minimum NetWare 5.1 SP8, Netware 6.0 SP5, and Netware 6.5 SP6. Patch includes updated NILE.NLM based on OpenSSL which requires updates in WSPSSL to work correctly. The NILE update is for NetWare 6.5 SP6 only.

Several ABENDS fixed

http://download.novell.com/Download?buildid=6GiuC1kbuzo~

Note: If applying this patch to a server that has SP7 applied, you may get an error saying that it cannot be applied to this version. (This Patch needs minimum Netware 6.5 SP6. Please apply the necessary Support Pack and re-start this install). This refers to the NILE update which is already in Sp7, not the Winsock patch.

USB driver update

http://download.novell.com/protected/Summary.jsp?buildid=eKyy-Lu88IA~

This patch contains updated USB drivers that fix the problem of Dell Poweredge x9xx servers with a version 2.x BIOS hanging upon shutdown. The problem is described in the following TID: https://secure-support.novell.com/KanisaPlatform/Publishing/577/3197913_f.SAL_Public.html

Note that the problem is not specific to SP7 but has only been discovered after the release of SP7.

iprntnw65sp7a

http://download.novell.com/protected/Summary.jsp?buildid=u0MH4z5NQts~

Updated iPrint modules (NDPSM.NLM, NDPSGW.NLM, and IPPSRVR.NLM) for NetWare 6.5 Support Pack 7.

This update is intended for servers running NDPS or iPrint on NetWare 6.5 Support Pack 7. This update is also recommended for servers running Support Pack 6 and encountering the problem documented in TID 3842033.

Fixes issue with Macs running 10.5.2 and Security Update 2008-02 abending the server.

https://secure-support.novell.com/KanisaPlatform/Publishing/667/3842033_f.SAL_Public.html

Post SP7 known issues

Plugins incompatible with iManager 2.7 (Bordermanager)

If you have products like Bordermanager for which there are no iManager 2.7 plugins available yet, the fact that SP7 installs iManager 2.7 can create the bad situation that you can no longer manage your product. Fortunately however, the SP7 install does not touch your previous iManager installation. iManager 2.7 is just installed in parallel and the Apache2 httpd.conf file is updated to disable the old iManager and enable the new iManager installation. You can very easily revert to your previous iManager installation as follows: Edit the file httpd.conf in sys:apache2 and towards the end of the file, comment out the line:

Include sys:/tomcat/5.0/conf/nps-Apache.conf

and re-enable the line:

Include sys:/tomcat/4/conf/nps-Apache.conf

Now, from the server console, reset your Apache2 using the command AP2WEBRS and now your iManager link will again bring up your previous iManager installation. If later on, you want to switch to iManager 2.7 again, just reverse the operation again.

This will of course only work if you updated an existing NetWare 6.5 server to SP7. When installing a new server using the SP7 overlay CDs, there is no old iManager installation which you can go back to. To work around this, you can install iManager 2.6 on a Windows PC and then authenticate it to the NetWare server.

Tomcat doesn't work as a standalone server

Broken CoyoteConnector. The fix will be included in SP8. To work around this, you can use HttpConnector TID3017232.

Protected memory space console commands

The "RESTART" and "ADDRESS SPACE=" options can no longer be used together with the LOAD command. E.g. a command like the following are no longer recognized:

LOAD RESTART ADDRESS SPACE = MINE MYPROG.NLM

This change in behaviour was the result of fixing a bug in the command line decoder for the load command. Instead of the line above, you should now use one of the following 2 possibilities:

  • Omit the "ADDRESS SPACE=" option.
LOAD RESTART MYPROG.NLM

This of course has the disadvantage that you no longer control the name of the address space, but it gets a name automatically generated by the OS

  • Use 2 separate commands to load the NLM and to make it restartable
LOAD ADDRESS SPACE = MINE MYPROG.NLM
PROTECTION RESTART MINE

Note that the syntax "LOAD RESTART ADDRESS SPACE" was never an [officially documented] syntax and just happened to work by chance before SP7. According to the documentation, the options "PROTECTED", "RESTART" and "ADDRESS SPACE" are mutually exclusive. The "wrong" usage is very common among Groupwise installations, probably because of TID2953603.

BorderManager transparent proxy no longer works

BorderManager Site-to-Site VPN connections to SKIP Slaves will fail

There's no known workaround for this currently, and it's likely the best idea to get rid of any leftover SKIP slaves in a Bordermanager S2S setup.

Bad Resource Tag passed to LSLReturnRcvECB abend

This bug related to the TCPIP protocol stack mostly happens on BorderManager servers, but might hit non BorderManager servers as well. The bug is documented in TID3754180. The TCPIP update mentioned above fixes this abend.

Public symbol errors in PORTAL.NLM

On some servers, after installing SP7, PORTAL.NLM fails to load with public symbol errors. This is caused by SP7 not having installed the updated server.exe. This problem has been seen sporadically and independently of the McAfee issue. The exact circumstances that lead to the issue have not been found yet, but the issue is easy to fix: Either install SP7 again (do not use the backup option on the second install), or manually copy the server.exe file from SP7 to the server's c:\nwserver directory.

BackupExec OFM does not work with SP7

The open file manager from BackupExec is not compatible with SP7 and causes page fault abends during backup. The COMN.NSS update mentioned above will fix this abend.

DNS Name resolution problems after applying SP7

There is at least one confirmed issue regarding Name resolution in SP7, where for instance ping commands to known good DNS names will fail, claiming that the name can not be resolved. A nslookup for the same name will be succesful though, and oddly, also an iptrace to the same name will work fine. Another affected piece is timesync, which will fail to resolve DNS names suddenly. The reason for this seems to lie in winsock. Lan traces show that the server will always attempt to resolve every name with it's configured local DNS name (as configured in sys:\etc\resolv.cfg) appended first. Only if the nameserver responds with an error on that request, the server will then attempt to resolve the correct name without it's own domain appended. Some nameservers however do not respond with an error if the local domain is valid, but will simply respond with an empty resource record. In that case, the server will never attempt to resolve the proper name, and resolution will ultimatively fail.

After more than a year uptime iManager 2.7 causes Cluster Server Abend

Warning.gif Warning: Do not use iManager 2.7 Volume browse feature on NW6.5 cluster nodes which have an relatively old patch level. In our case SP3

Very enthusiastic about the new tree view feature of iManager 2.7 i've started browsing some of our NW6.5SP3 Servers NSS Volumes. On a single Server it wasn't a problem but trying to view the directory structure of our cluster volumes causes the following abend on the cluster node which held the resource and the cluster volume went to comatose state.

  Novell Netware, V6.5 Support Pack 3 - CPR Release
  PVER: 6.50.03
  Server XXXXX36 halted Tuesday,  4 December 2007  16.09.15.072 
  Abend 1 on P00: Server-5.70.03-0: NCPIP: ReplyDisgard overflowed reply buffer!!
  EIP in NCPIP.NLM at code start +000032F8h
  Running process: Server 00:51 Process
  Thread Owned by NLM: SERVER.NLM

I assume that the cause of the abend may be because of the patch level of our NetWare 6.5 Cluster Servers. It's still SP3 at the moment.

NetWare module GAMS.NLM will be backrev'ed

Installing either NetWare 6.5 Support Pack 6, NetWare 6.5 Support Pack 7 or Novell eDirectory 8.8 on a Novell Netware 6.5 Server with Service Pack 5 will backrev module GAMS.NLM ver. 1.30 Tuesday, 5 July 2005 to GAMS.NLM ver. 1.20 October 8, 2004.

Common questions

Here is a collection of questions related to SP7 that have asked in the forums, and the current answers to them. See The Netware Forum Directory

Q
Can I use the SP7 overlay CDs to install eDirectory 8.8.2?
{{{Signature}}}

Answer: No!
To install eDirectory 8.8.2 on an existing server, you have to use one of the 2 download versions of eDirectory 8.8.2. Either the ISO version at http://download.novell.com/Download?buildid=7hvDT3VNzNw~ or the regular version at http://download.novell.com/Download?buildid=Hy6G7XZcNXg~

Q
Can I apply TCP680B.EXE.ZIP on top of SP7?
The TCP680B patch appears to be newer than the TCPIP files from SP7. Can I apply this patch on top of SP7?
{{{Signature}}}

Answer: No longer!
The TCP680B patch is based on the v6.80x TCPIP code base form SP6. SP7 contains a newer v6.81x code base. As such, the TCP680N patch has never been intended to be used on SP7 servers. This update was temporarily recommended as fix to the abend issue described in the previous section. However by now, there is the TCP681j.exe update at http://download.novell.com/Download?buildid=aRl9LgVUbTw~ which should be used instead.

Q
Will Novell fix LOAD RESTART ADDRESS SPACE issue? when? Have SP5 servers waiting for update..
{{{Signature}}}

Answer: The fix will be included in SP8.
However given that you just need to change your load commands, this problem should not prevent you from using SP7 now.