ZENworks Errors

From MicroFocusInternationalWiki
Jump to: navigation, search

ZENworks Imaging (IMG)

Error Code:

0 - .Workstation belongs to different NDS tree than Image Server
0 - .Could not connect to Image Server
0 - .Success - no changes made to hard drive
1 - .New image successful
1 - .Imaging Successful
1 - This version of the image engine cannot read the current image archive
1 - Found erroneous data in an MFT entry (NTFS related)
2 - .No work for proxy
2 - Expected a base image archive
2 - Bad attribute split attempted (NTFS related)
3 - The archive opened did not have the id string
3 - Couldn't split the $DATA attribute of $MFT (NTFS related)
4 - .Advanced script downloaded
4 - Specified a set that is out of range
4 - Cluster mismatch (NTFS related)
5 - Could not find a boot file in the partition
5 - Usually one of the NTFS directory functions could not find one of the index - related attribute is expected
6 - An invalid partition number was specified
6 - Could not write NTFS directory tree -- too deep
7 - Attempted to include the destination in an image
7 - Couldn't find the $ATTRIBUTE_LIST attribute
8 - No destination path given for local image
8 - Couldn't find the $DATA attribute of $MFT-0
9 - Found a file I don't want to restore
9 - Couldn't find the $BITMAP attribute of $MFT

10 - Bad partition number given for destination
10 - Couldn't read $Bitmap file when opening volume (NTFS related)
11 - No image type was given
11 - Couldn't read $UpCase when opening volume (NTFS related)
12 - NTFS partition failed check
13 - MFT_BITMAP_TOO_SMALL (NTFS related)
14 - Attribute not found (NTFS related)
15 - Bad attribute (NTFS related)
16 - Bad index (NTFS related)

31 - .Image archive overwrite disabled by administrator
38 - Can not restore files to a swap partition
39 - The size given for a partition is too large for that type
39 - Can not restore files, partition is not mounted
40 - The size given for a partition is too small for that type
40 - .Administrator killed the Image Server
40 - Could not reset file modes
41 - An invalid parition size was given on the command line
41 - Could not reset owners attribute
42 - Tried to modify a ZEN partition but there wasn't one
42 - Could not create a reiserFS hard link
43 - .No eligible partition to receive image
43 - Could not create a reiserFS special node
44 - Archive has more partitions that can be restored on current computer
44 - Could not create a reiserFS symbolic link
45 - Cluster sizes must be multiples of 2
45 - Could not create a reiserFS directory
46 - Cannot create an ext part inside an ext part
46 - Could not create a reiserFS regular file
47 - Could not find the parent ext partition
47 - Couldn't read a symbolic link
48 - Expected to get a partition that resides inside an extended partition
49 - Partition too small for requested partition type
50 - .Partition size requested will not fit on disk(not enough space on the drive)
51 - Partition type given was not valid
52 - No partition type given when asked to create a part
53 - Active partition is empty 54 - .Cannot create a partition in an occupied slot
54 - Tried to create a partition where one already exists
55 - .Cannot delete empty partition
56 - No slaves were registered with master
57 - .Multicast session failed
57 - Slave was notified that the master aborted
58 - .Image file is invalid
58 - This client was dropped (check comms?)
59 - .Image file path is invalid or multicast master lost clients
59 - All slaves have dropped off
60 - Slave can not communicate with Master because they each use a different protocol version
61 - Could not get local MAC address
62 - Could not connect to master
63 - Could not read from the mcast session
64 - Multicast client lost resend session sync
65 - Multicast client did not respond within retry limits
66 - Multicast client did not get an expected data seq
67 - Multicast session started before slave could register
78 - .Failed to write to Image Server, check available space on server
80 - .Connection Time Out

106 - An attempt was made to delete the root dir
107 - Could not open the dir needed to do some work
108 - Reached the end of the directory
109 - .Disk is full
109 - Couldn't find enough disk space for request
110 - Directory not empty
111 - File not found
122 - Invalid data in the BIOS Parameter Block (BPB). Fix attempted but not successful
123 - geometry mismatch on a raw partition

130 - Interrupt from keyboard (SIGINT)
131 - Quit from keyboard (SIGQUIT)
132 - Illegal instruction (SIGILL)
134 - Abort signal from abort(3) (SGIABRT)
136 - Floating point exception (SIGFPE)
137 - Received kill signal (SIGKILL)
139 - Program encountered a segmentation fault-invalid memory reference (SIGSEGV)
141 - Broken pipe: write to pipe with no readers (SIGPIPE)
143 - Termination Signal (SIGTERM)

148 - One of the -options was invalid
149 - The 'a' portion of ax:px specified an invalid partition
150 - The 'p' portion of ax:px specified an invalid partition
151 - File path fiven is too long
152 - Bad proxy address given
152 - .Bad Image server address given
153 - Not enough info given for proxy job
154 - .Illegal arguments given on command-line
154 - Bad arguments on command line
155 - .Illegal mode given on the command-line
155 - Bad operational mode expressed on command-line
163 - PROXYADDR environment variable not defined
164 - Error when trying to send the multicast pulse command
165 - Timed out or lost connection on network
166 - Couldn't find a proxy addr in environment variable
167 - Failed to open a socket for network communication
175 - Won't update when booted via PXE
176 - Won't update when booted from floppy
177 - Won't update when booted from CD
178 - Could not write to the file
179 - Could not open file we're updating
194 - There is no image safe data on the disk
195 - .Invalid compression level specified
195 - User specified an invalid compression Level
196 - Failed on call to iconv_close (unicode related)
197 - Unicode translate failed
198 - Failed on call to iconv_open (unicode related)
199 - Broken pipe (probably to the proxy)

200 - .Hard Drive/CD-Rom jumpered incorrectly or bad hard drive, please check.
200 - Program encountered a segmentation fault (OBSOLETE)
201 - .Program terminated due to user abort
201 - .Unicast/Multicast session canceled
201 - User pressed Ctrl-C to exit program
202 - Bzip compressed more bytes than requested
203 - Bzip engine failed during decompression
204 - Bzip engine failed during compression
205 - Tried to mount an extended partition
206 - Destination is too full for the archive
207 - Unexpected end-of-file
209 - Memory request failed
220 - File is larger than the file system allows (FAT related)
221 - Could not open the directory (FAT related)
222 - Could not open the root directory (FAT related)
223 - .Bad cluster chain
251 - Client does not support master's compression
252 - Specified proxy does not support compression
253 - Restoration of an image encountered a bad fork
254 - Master aborted session before it started
254 - restoreBaseImage found an invalid file header
255 - .User aborted multicast session
255 - File marked as boot (unexpectedly) and cannot be handled

Note: Some of this information was obtained from resources formerly on http://www.zenimaging.info

Note: The host shell that runs IMG can only return codes in the range of 0-255. IMG can track more than that so the shell calculates them down to between 0 and 255. Hence, you will see find more than one message for some return codes.