SUSE Manager/Migration 23
Migration from SUSE Manager 2.1 to SUSE Manager 3
The migration from SUSE Manager 2.1 to SUSE Manager 3 works quite the same as a migration from Red Hat Satellite to SUSE Manager. There is NO in-place migration! The migration happens from the original machine to a new one. While this has the drawback that you temporarily need two machines, it also has the advantage that the original machine will remain fully functional in case something goes wrong.
The whole process may be tricky, so it is strongly advised that the migration is done by an experienced consultant. Given the complexity of the product, the migration is an "all-or-nothing", this means if something goes wrong you will need to start all over. Error handling is very limited. Nevertheless it should work more or less out of the box if all the steps are carefully executed as documented.
Please note that the migration involves dumping the whole database on the source machine and restoring it on the target machine. This is a very time-consuming process! Also all of the channels and packages need to be copied to the new machine, so expect the whole migration to take several hours!
The source machine needs to run SUSE Manager 2.1 with all the latest updates applied! Before trying to migrate, please make sure that the machine is up to date and all updates are installed!
Only machines running with the embedded postgresql database may be migrated. For the migration of an Oracle based installation, a two-step migration is required: First the installation needs to get migrated from Oracle to postgresql (by means of a separate tool) and afterwards the migration to SUSE Manager 3 can be performed as documented here.
For the special case of migrating a SUSE Manager server with external Oracle database to SUSE Manager 3 with external Oracle database, please also read this section.
As SUSE Manager 3 does no longer support NCC but only SCC, you can migrate a machine only after it has been switched to SCC. The migration script will check if the installation has already been switched to SCC and will terminate if this is not the case. Switch to SCC on the source machine and repeat the migration.
During migration the database from the source machine needs to get dumped and this dump needs to be temporarily stored on the target system. The dump gets compressed with
gzip using the default compression options (maximum compression only yields about 10% of space savings but costs a lot of runtime); so check the disk usage of the database with
du -sch /var/lib/pgsql/data and ensure that you have at least 30% of this value available in
These values from a test migration might help illustrate the space requirements:
f204:/var/lib/pgsql # du -sch data 1,8G data 1,8G total f204:/var/spacewalk/packages # l -h /tmp/susemanager.dmp.gz -rw-r--r-- 1 root root 506M Jan 12 14:58 /tmp/susemanager.dmp.gz
This is a small test installation; for bigger installations the ratio might be better (space required for the database dump might be less than 30%).
The dump will be written to the directory
/var/spacewalk/tmp, the directory will be created if it does not exist yet. If you want the dump to be stored somewhere else, change the definition of the variable
$TMPDIR on the beginning of the script to suit your needs.
Setting up the target machine
After the target system has been installed with SLE12SP2 and the add-on product "SUSE Manager Server 3", just run
yast2 susemanager_setup as you would do for a normal installation of SUSE Manager.
On the first screen, make sure to check
Migrate a SUSE Manager compatible server instead of
Set up SUSE Manager from scratch.
On the second screen, enter the name of the source system as
Hostname of source SUSE Manager Server as well as the domain name. Also enter the database credentials of the source system.
On the next screen, you will need to specify the IP address of the target system. Normally this value should be pre-set to the correct value and you only should need to press ENTER. Only in the case of multiple IP addresses you might need to specify the one that should be used during migration. Please note that during the migration process, the target system will fake its host name to the one of the source system, because the host name of a SUSE Manager installation is very vital and should be used from the very beginning. So do not get confused when logging in to the systems during migration; they both will present you with the same hostname!
The next screens are the same as for a regular installation: Just specify the database parameters (using the same ones as on the source system is recommended) and your SCC credentials.
After all the data has been gathered,
YaST2 will terminate. The actual migration will NOT start automatically but needs to be triggered manually!
Performing the migration
The actual migration is performed by giving the command
/usr/lib/susemanager/bin/mgr-setup -m. This will read the data gathered in the previous step, set up SUSE Manager on the new machine and transfer all of the data from the source machine. As it needs to perform several operations on the source machine via ssh, you will be prompted once for the root password of the source machine. A temporary ssh key named "migration-key" is created and installed on the source machine, so you need to give the root password only once. Of course the temporary ssh key will be deleted after successful migration.
Ideally, this is all you will need to do. Depending on the size of the installation, the actual migration will take up to several hours. Once finished, you will be prompted to shutdown the source machine, re-configure the network of the target machine to use the same IP address and host name as the original machine and restart it. It should now be a fully functional replacement for your previous 2.1 installation.
The following numbers illustrate the runtime for dumping and importing the database:
14:53:37 Dumping remote database to /var/spacewalk/tmp/susemanager.dmp.gz on target system. Please wait... 14:58:14 Database successfully dumped. Size is: 506M 14:58:29 Importing database dump. Please wait... 15:05:11 Database dump successfully imported.
So dumping the database took about five minutes and importing the dump on the target system took about seven minutes. For big installations this can take up to several hours. Additionally account for the time it takes to copy all the package data to the new machine. Depending on your network infrastructure and hardware, this can also take significant time.
Speeding up the migration
Since a lot of data needs to be copied the whole migration can consume a lot of time. The actual migration can be sped up by doing one of the most time consuming task prior to the actual migration: The copying of all the channels, packages, autoinstall images and so on. So the following approach is recommended: Once you gathered all the data via YaST2, run the following command:
This will copy the lion's share of the data from the old server to the new one. This command can be run at any time; the current server remains fully functional during this task. Once the actual migration is started, only the data changed since running above command needs to be transferred which significantly will reduce the downtime.
On huge installations, the transfer of the database (which involves dumping of the database on the source machine and importing the dump on the target system) still can take quite some time. This is unavoidable as we only can dump the whole database. Of course during this time no write operations may happen, therefore the migration script needs to shutdown the SUSE Manager services on the source machine.
Packages on external storage
Some installations might store the package data on external storage (eg. NFS mount on
/var/spacewalk/packages). In such a case it is of course pointless to have all this data copied to the new machine. Just edit the script
/usr/lib/susemanager/bin/mgr-setup and remove the respective
rsync command (around line 345). Make sure to have the storage mounted on the new machine before the first start of the system!
Analogue handling for
/srv/www/htdocs/pub if appropriate.
Broken UI after migration
Chances are you will notice a broken user interface after migration. This is not a bug, but a browser caching issue. The new machine has the same hostname and the same IP address as the old machine which can confuse some web browsers. If you are experiencing this issue, just do a forced reload of the page (in Firefox this is accomplished by pressing the key combination
ctrl-F5) and everything will be fine.
This is the output of a typical migration:
e50:~ # /usr/lib/susemanager/bin/mgr-setup -m Filesystem type for /var/spacewalk is ext4 - ok. Open needed firewall ports... Migration needs to execute several commands on the remote machine. Please enter the root password of the remote machine. Password: Remote machine is SUSE Manager Remote system is already migrated to SCC. Good. Shutting down remote spacewalk services... Shutting down spacewalk services... Stopping Taskomatic... Stopped Taskomatic. Stopping cobbler daemon: ..done Stopping rhn-search... Stopped rhn-search. Stopping MonitoringScout ... [ OK ] Stopping Monitoring ... [ OK ] Shutting down osa-dispatcher: ..done Shutting down httpd2 (waiting for all children to terminate) ..done Shutting down Tomcat (/usr/share/tomcat6) ..done Terminating jabberd processes... Stopping router ..done Stopping sm ..done Stopping c2s ..done Stopping s2s ..done Done. CREATE ROLE * Loading answer file: /root/spacewalk-answers. ** Database: Setting up database connection for PostgreSQL backend. ** Database: Populating database. ** Database: Skipping database population. * Configuring tomcat. * Setting up users and groups. ** GPG: Initializing GPG and importing key. * Performing initial configuration. * Configuring apache SSL virtual host. ** /etc/apache2/vhosts.d/vhost-ssl.conf has been backed up to vhost-ssl.conf-swsave * Configuring jabberd. * Creating SSL certificates. ** Skipping SSL certificate generation. * Deploying configuration files. * Setting up Cobbler.. * Setting up Salt Master. 11:26:47 Dumping remote database. Please wait... 11:26:50 Database successfully dumped. Copy remote database dump to local machine... Delete remote database dump... 11:26:50 Importing database dump. Please wait... 11:28:55 Database dump successfully imported. Schema upgrade: [susemanager-schema-18.104.22.168-3.2.devel21] -> [susemanager-schema-3.0.5-5.1.develHead] Searching for upgrade path to: [susemanager-schema-3.0.5-5.1] Searching for upgrade path to: [susemanager-schema-3.0.5] Searching for upgrade path to: [susemanager-schema-3.0] Searching for start path: [susemanager-schema-22.214.171.124-3.2] Searching for start path: [susemanager-schema-126.96.36.199] The path: [susemanager-schema-188.8.131.52] -> [susemanager-schema-184.108.40.206] -> [susemanager-schema-2.1.51] -> [susemanager-schema-3.0] Planning to run schema upgrade with dir '/var/log/spacewalk/schema-upgrade/schema-from-20160112-112856' Executing spacewalk-sql, the log is in [/var/log/spacewalk/schema-upgrade/schema-from-20160112-112856-to-susemanager-schema-3.0.log]. (248/248) apply upgrade [schema-from-20160112-112856/99_9999-upgrade-end.sql] e-suse-channels-to-public-channel-family.sql.postgresql] The database schema was upgraded to version [susemanager-schema-3.0.5-5.1.develHead]. Copy files from old SUSE Manager... receiving incremental file list ./ packages/ sent 18 bytes received 66 bytes 168.00 bytes/sec total size is 0 speedup is 0.00 receiving incremental file list ./ RHN-ORG-TRUSTED-SSL-CERT res.key rhn-org-trusted-ssl-cert-1.0-1.noarch.rpm suse-307E3D54.key suse-39DB7C82.key suse-9C800ACA.key bootstrap/ bootstrap/bootstrap.sh bootstrap/client-config-overrides.txt bootstrap/sm-client-tools.rpm sent 189 bytes received 66,701 bytes 44,593.33 bytes/sec total size is 72,427 speedup is 1.08 receiving incremental file list ./ .mtime lock web.ss config/ config/distros.d/ config/images.d/ config/profiles.d/ config/repos.d/ config/systems.d/ kickstarts/ kickstarts/autoyast_sample.xml loaders/ snippets/ triggers/ triggers/add/ triggers/add/distro/ triggers/add/distro/post/ triggers/add/distro/pre/ triggers/add/profile/ triggers/add/profile/post/ triggers/add/profile/pre/ triggers/add/repo/ triggers/add/repo/post/ triggers/add/repo/pre/ triggers/add/system/ triggers/add/system/post/ triggers/add/system/pre/ triggers/change/ triggers/delete/ triggers/delete/distro/ triggers/delete/distro/post/ triggers/delete/distro/pre/ triggers/delete/profile/ triggers/delete/profile/post/ triggers/delete/profile/pre/ triggers/delete/repo/ triggers/delete/repo/post/ triggers/delete/repo/pre/ triggers/delete/system/ triggers/delete/system/post/ triggers/delete/system/pre/ triggers/install/ triggers/install/post/ triggers/install/pre/ triggers/sync/ triggers/sync/post/ triggers/sync/pre/ sent 262 bytes received 3,446 bytes 7,416.00 bytes/sec total size is 70,742 speedup is 19.08 receiving incremental file list kickstarts/ kickstarts/snippets/ kickstarts/snippets/default_motd kickstarts/snippets/keep_system_id kickstarts/snippets/post_delete_system kickstarts/snippets/post_reactivation_key kickstarts/snippets/redhat_register kickstarts/snippets/sles_no_signature_checks kickstarts/snippets/sles_register kickstarts/snippets/sles_register_script kickstarts/snippets/wait_for_networkmanager_script kickstarts/upload/ kickstarts/wizard/ sent 324 bytes received 1,063 bytes 2,774.00 bytes/sec total size is 12,133 speedup is 8.75 receiving incremental file list ssl-build/ ssl-build/RHN-ORG-PRIVATE-SSL-KEY ssl-build/RHN-ORG-TRUSTED-SSL-CERT ssl-build/index.txt ssl-build/index.txt.attr ssl-build/latest.txt ssl-build/rhn-ca-openssl.cnf ssl-build/rhn-ca-openssl.cnf.1 ssl-build/rhn-org-trusted-ssl-cert-1.0-1.noarch.rpm ssl-build/rhn-org-trusted-ssl-cert-1.0-1.src.rpm ssl-build/serial ssl-build/d248/ ssl-build/d248/latest.txt ssl-build/d248/rhn-org-httpd-ssl-archive-d248-1.0-1.tar ssl-build/d248/rhn-org-httpd-ssl-key-pair-d248-1.0-1.noarch.rpm ssl-build/d248/rhn-org-httpd-ssl-key-pair-d248-1.0-1.src.rpm ssl-build/d248/rhn-server-openssl.cnf ssl-build/d248/server.crt ssl-build/d248/server.csr ssl-build/d248/server.key ssl-build/d248/server.pem sent 380 bytes received 50,377 bytes 101,514.00 bytes/sec total size is 90,001 speedup is 1.77 SUSE Manager Database Control. Version 1.5.2 Copyright (c) 2012 by SUSE Linux Products GmbH INFO: Database configuration has been changed. INFO: Wrote new general configuration. Backup as /var/lib/pgsql/data/postgresql.2016-01-12-11-29-42.conf INFO: Wrote new client auth configuration. Backup as /var/lib/pgsql/data/pg_hba.2016-01-12-11-29-42.conf INFO: New configuration has been applied. Database is online System check finished e50:~ # ============================================================================ Migration complete. Please shut down the old SUSE Manager server now. Reboot the new server and make sure it uses the same IP address and hostname as the old SUSE Manager server! ============================================================================
In case of trouble
- check diskspace
- check the output of the following command:
ssh root@<SUMa_2.1_machine> "su -s /bin/bash - postgres -c exit"
This Command shouldn't produce any output. If it does, it can lead to corrupted transfer of the archive with the database dump. Please re-visit your bash environment on the 2.1 machine (e.g. .bashrc file) and make sure no extra text is printed on the shell start.
- check best practices:
- /var/spacewalk and /var/lib/pgsql on separate (XFS) filesystem
- and don't forget to remove subvolume entry in /etc/fstab for subvolume of /var/lib/pqsql when using a separate file system and reboot server first before continuing.
To try again do the following on the new server:
- remove /root/.MANAGER_SETUP_COMPLETE
- stop postgresql and remove /var/lib/pgsql/data
- set the hostname correctly (it know has the hostname from the old SUSE Manager server)
- correct the /etc/hosts
- on the new server check /etc/setup_env.sh and see if the correct database name is set: MANAGER_DB_NAME='susemanager'
- reboot the server before running mgr-setup again.